Home / Machines / Rewinding and slitting machines / PROFIline US-A700 - 1900

Rewinding and slitting machine PROFIline US-A700 - 1900

The PROFIline US-A700 - 1900 rewinding and slitting machine enables the converting of roll materials made of paper, films, adhesive tapes and laminates up to 800 g/m² with a web width of up to 1300 mm. The unwinder can accommodate a material diameter of 1000 mm and carries 400 kg.

Made from a solid steel frame, the robust machine is easy to operate after just a short training period.

The simple, efficient design of the system enables extremely short set-up and changeover times.

The PROFIline US-A machine is available in widths of 700, 900, 1100, 1300, 1500, 1700 and 1900.

Material to be processed: Adhesive tapes, paper, film, laminates up to 800 gr/m².

Request now 

 
 
 Datenblätter US-700 US-900 US-1100 US-1300 US-1500 US-1700 US-1900
 Datasheets US-700 US-900 US-1100 US-1300 US-1500 US-1700 US-1900

Features of the PROFIline US-A700 - 1900

Steel frame

  • Side panels made of painted steel plates
  • Steel base plate
  • Sides and cover plates made of sheet steel
  • Electronics integrated in the machine housing
  • Connection 400 Volt

Unwinding with pneumatic expansion shaft

  • Right/left unwinding possible
  • Web tension adjustable via magnetic powder clutch
  • Pneumatic expansion shaft 76 mm
  • Diameter max. Ø 1000 mm
  • Roller weight max. 400 kg
  • Material width from 150 mm to 1,300 mm
  • Stop sensor (at end of roll)

Web center control (web edge control)

  • By means of 2 light scanners

Preferred unit

  • Steel roller
  • Rubberized pressure roller
  • Adjustable contact pressure of the pressure roller
  • Driven by electric motor
  • Web speed up to 200 m/min depending on product

Suction device

  • Axial fan for extracting an edge strip

Slitter

  • Silhouette system
  • Eight upper knives
  • Eight bottom knives
  • Minimum cutting width 18 mm
  • (different knife systems on request)

Counter

  • Running meter counter
  • Machine stops when the preselected length is reached

Rewinding

  • Two pneumatic expansion shafts for 3 inch sleeves
  • Web tension adjustable via magnetic powder clutch
  • Diameter max. Ø 600 mm
  • Roller weight max. 400 kg
  • Material width from 30 mm to 1,300 mm
  • Permissible axle weight 300 kg

Support rollers

  • Three mechanical support rollers for
  • Pressure on the finished wrap

Operating and control unit

  • Main switch
  • Control ON / OFF
  • Machine START / STOP
  • Emergency stop
  • Variable speed through rotary potentiometer
  • Meter and label counter switchable
  • Automatic stop of the machine when the preselected number of meters / labels is reached
  • Electronic components integrated in the machine housing
  • Safety system with light curtain around the machine

Technical data

  • Electrical voltage: 400 Volt
  • Electrical power: 7 KW
  • Current: 12 amps
  • Frequency: 50 Hz
  • Length x width x height approx.: 2,600 mm x 2,370 mm x 1,860 mm
  • Weight approx.: 2,500 kg
​