Home / Machines / Rewinding and slitting machines / EASYline US-700 to US-1900

Rewinding and slitting machine EASYline US-700 to US-1900

The EASYline US-700 to US-1900 rewinding and slitting machines enable the converting and inspection of web-shaped materials with a web width of up to 1900 mm.

Made from a solid steel frame, the robust machine is easy to operate after just a short training period. The speed can be controlled electronically. The machine stops automatically once a preset number of running meters has been reached.

The simple, efficient design of the system enables extremely short set-up and changeover times.

Material to be processed: Adhesive labels, paper, film, laminates up to 800 gr/m².

The EASYline US rewinding and slitting machine is also available as an optional laminating machine.

Odoo • Text und Bild

 

 Datenblätter US-700 - US-900 US-1100 - US-1300 US-1500  US-1600 - US-1800

Request now 

 
 
 
 

Equipment of the EASYline US-700 - 1900

Steel frame

  • Side panels made of painted steel plates

  • Steel base plate

  • Sides and cover plates made of sheet steel

  • Electronics integrated in the machine housing

  • Connection 400 Volt

Unwinding with pneumatic expansion shaft

  • Right/left unwinding possible

  • Web tension adjustable over 100 Newton magnetic powder clutch

  • Automatic web tension control

  • Pneumatic expansion shaft 76 mm

  • Diameter max. Ø 800 mm

  • Roller weight max. 1000 kg

  • Material width from 100 mm to 1,100 mm

  • Stop sensor (at end of roll)

Web center control (web edge control)

  • By means of 2 contrast sensors

Laminating unwinder (optional)

  • Pneumatic expansion shaft 76 mm

  • Right/left unwinding possible

  • Web tension adjustable via 25 Newton magnetic particle brake

  • Diameter max. Ø 300 mm

  • Roller weight max. 250 kg

  • Material width from 100 mm to 1,100 mm

Laminating unwinder (optional)

  • Pneumatic expansion shaft 76 mm

  • Right/left unwinding possible

  • Web tension adjustable via 25 Newton magnetic particle brake

  • Driven via toothed belt from the main drive

  • Diameter max. Ø 800 mm

  • Roller weight max. 1,200 kg

  • Material width from 100 mm to 1,800 mm

Preferred unit

  • Steel roller

  • Rubberized pressure roller, pneumatically adjustable

  • Adjustable contact pressure of the pressure roller

  • Driven by electric motor

  • Yaskawa frequency inverter

  • Web speed up to 100 m/min depending on product

  • Cover with limit switch

Suction device

  • Axial fan for extracting an edge strip

Slitter

  • Silhouette system

  • 8 top knives with clamp

  • 8 bottom knives clamped by means of bushes

  • Minimum cutting width 30 mm

  • Additional 10 blade knives

  • Cover with limit switch

  • (other knife systems on request)

Counter

  • Running meter counter

  • Machine stops when the preselected length is reached

Rewinding

  • Two pneumatic expansion shafts for 3 inch sleeves

  • Track tension adjustable via 50 Newston magnetic powder clutch

  • Diameter max. Ø 450 mm

  • Max. castor weight 350 kg

  • Inner/outer winding optional

Support rollers

  • Four mechanical support rollers for pressing on the finished coil

Operating and control unit

  • Main switch

  • Control ON / OFF

  • Machine START / STOP

  • Emergency stop with safety relay

  • Variable speed through rotary potentiometer

  • Meter counter switchable

  • Automatic stop of the machine when the pre-selected

  • Number of meters / number of labels

  • Electronic components integrated in the machine housing

Technical data

  • Electrical voltage: 400 Volt

  • Electrical power: 5 KW

  • Current: 16 amps

  • Frequency: 50 Hz

  • Air connection: 6 bar

  • Warranty 2 years

​