Home / Machines / Rewinding and slitting machines / EASYline US-320QC and US-420QC

EASYline US-320QC and US-420QC rewinding and slitting machine

The EASYline US-320QC/ 420QC rewinding and slitting machine enables the production of narrow cut rolls from any roll materials such as paper, films, adhesive labels and laminates up to approx. 800 g/m². It converts and controls web-shaped materials up to a width of 320mm/420mm.

The robust machine with its solid steel frame is easy to operate after a short training period. The speed can be controlled electronically. The machine stops automatically once a preset number of labels or running meters has been reached.

The simple, efficient design of the system enables extremely short set-up and changeover times.

Material to be processed: Adhesive labels, paper, film, laminates up to 800 gr/m².

 Data sheet - german     Datasheet - english 

Request now 

Umroll- und Schneidmaschine EASYline US-320QC und US-420QC
 
 

Equipment of the EASYline US-320QC/ US-420QC

Steel frame

  • Side panels made of painted steel plates

  • Steel base plate

  • Sides and cover plates made of sheet steel

  • Electronics integrated in the machine housing

  • Connection 240 Volt

Unwinding with pneumatic expansion shaft

  • Right/left unwinding possible

  • Web tension adjustable via magnetic powder clutch

  • Pneumatic expansion shaft 76 mm

  • Diameter max. Ø 700 mm

  • Max. castor weight 120 kg

  • Material width from 50 mm to 320 mm/ 420 mm

  • Stop sensor (at end of roll)

Splice tables

  • Sheet steel splice table

  • Two magnetic handles

  • Blade guide for cross or diagonal cutting

Web center control (web edge control)

  • By means of 2 light scanners

Preferred unit

  • Steel roller

  • Rubberized pressure roller

  • Adjustable contact pressure of the pressure roller

  • Driven by electric motor

  • Web speed up to 120m/min depending on product

Suction device

  • Axial fan for extracting an edge strip

Slitter

  • Silhouette system

  • Six top knives

  • Six bottom knives

  • Minimum cutting width 15 mm

  • (different knife systems on request)

Counter

  • Possibility to switch from label counter to linear meter counter

  • Machine stops when the preselected number of pieces/length is reached

Rewinding

  • Manual turnstile with two take-up spindles

  • Pneumatic expansion shaft for 1.5 inch cores (other sizes on request)

  • Web tension adjustable via magnetic powder clutch

  • Roller diameter max. 200 mm

  • Permissible axle weight 80kg

Operating and control unit

  • Main switch

  • Control ON / OFF

  • Machine START / STOP

  • Emergency stop

  • Variable speed through rotary potentiometer

  • Meter and label counter switchable

  • Automatic stop of the machine when the preselected number of meters / labels is reached

  • Electronic components integrated in the machine housing

  • Track run from left to right

Technical data

  • Electrical voltage: 240 volts

  • Electrical power: 1.80 KW

  • Current: 10 amps

  • Frequency: 50 Hz

  • Length x width x height approx.: 900 mm x 900 mm x 1,200 mm

  • Weight approx.: approx. 520 kg

​