Home / Machines / Inspection rewinder / EASYline INS2-320M

Inspection rewinder EASYline INS2-320M

            The high-performance EASYline INS2-320M inspection rewinder enables the rewinding of web-shaped materials up to a width of 320 mm. It is ideal for converting labels to a specific number of labels. The machine stops automatically when a preset number of labels is reached.

            It is also very well suited for quality control of printed and unprinted material webs. Defects can be detected by the machine operator and reworked if necessary. It is also possible to cut large rolls (up to max. 500 mm diameter, 80 kg weight) to short rolls thanks to the automatic cut-to-length function.

            The inspection speed can be infinitely adjusted using a potentiometer. The driven rewind shaft is supported by a magnetic powder brake that maintains a pre-set web tension. The unwind shaft can be used bi-directionally. A wide range of materials including films can be processed.

            The affordable and compact EASYline INS2-320M inspection rewinder is easy to set up and operate. It does not require trained specialist personnel and usually pays for itself after a short period of use.

            Material to be processed: e.g. adhesive labels, paper, film, fabric, laminates up to 800 g/m² and 320 mm wide.

            Highligths

            Automatic stop when a certain quantity is reached
            Automatic stop with an adjustable barrel length
            Bi-directional processing
            Expansion shafts for 3" cores
            Web tension control
            Infinitely variable speed
            Maximum diameter 500 mm, 80 kg
            Material width between 50 - 320 mm

            Options
            Camera surveillance
            Odoo • Text und Bild
             
             

            Features of the EASYline INS2-320M

            Steel frame

            • Side panels made of painted steel plates

            • Sides and cover plates made of sheet steel

            • Electronics integrated in the machine housing

            • Connection 240 Volt

            Unwinding with pneumatic expansion shaft

            • Right/left unwinding possible

            • Web tension adjustable via magnetic powder brake with potentiometer

            • Pneumatic expansion shaft 76 mm

            • Roller diameter max. 500 mm

            • Roll weight max. 80kg

            • Material width from 50 mm to 320 mm

            Preferred unit

            • Steel roller

            • Rubberized pressure roller

            • Adjustable contact pressure of the pressure roller

            • Electromotive drive

            • Web speed up to 70m/min depending on product

            Counter

            • Possibility to switch from label counter to linear meter counter

            • Machine stops when the preselected number of pieces/length is reached

            Rewinding

            • Pneumatic expansion shaft for 3 inch sleeves

            • Web tension adjustable via magnetic powder brake with potentiometer

            • Roller diameter max. 500 mm

            • Permissible axle weight 80 kg

            • Expansion shafts from 19 mm on request

            Operating and control unit

            • Main switch

            • Control ON / OFF

            • Machine START / STOP

            • Emergency stop

            • Variable speed through rotary potentiometer

            • Meter and label counter switchable

            • Electrical components integrated in the machine housing

            Technical data

            • Electrical voltage: 240 volts

            • Electrical power: 0.75KW

            • Frequency 50 Hz

            • Length x width x height: approx. 900 mm x 620 mm x 960 mm

            • Weight: approx. 200 kg

            ​